Commissioning; Figure 4-1 Measuring Flow - Siemens SITRANS F Quick Start Betriebsanleitung

Commissioning

4.1 Commissioning
1. From the [Meter Type] menu press the <Right Arrow> key to select [Single Channel] and
2. The [Channel Setup] menu will appear.
3. Scroll down to [Install Complete]. Press the <Right Arrow> key.
4. Press the <Down Arrow> key and select [Install].
5. Press <ENTER> key. The flow meter will go through drives.
6. Observe the Measured Vs window and verify a correct sound velocity measurement (if
7. Press the <Down Arrow> key to accept sound velocity value.
8. The flow meter is now ready to report flow.
9. Press the <Left Arrow> key until the screen displays flow data or press <ENTER>.
10. Use the <Right Arrow> and <Up/Down Arrow> keys to switch between display lines and
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05
then press <ENTER>.
known).
①
Select [Install].
Figure 4-1 Measuring Flow
to select flow data items.
4
31