Figure 3-10 Connecting Sensor Cables To Transmitter - Siemens SITRANS F Quick Start Betriebsanleitung

Connecting
3.3 Installing the Sensor
Connecting Sensor Cables
1. Observing the upstream/downstream orientation, attach the UP (upstream) and DOWN
2. Attach the other ends to the UP and DOWN terminals of the transmitter and finger
3. Close top cover and tighten securing screws.
30
(downstream) cables to the sensors and finger tighten.
tighten.
①
To Downstream Sensor
②
To Upstream Sensor
Figure 3-10 Connecting Sensor Cables to Transmitter
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05