Siemens SITRANS F Quick Start Betriebsanleitung Seite 20

Connecting
3.2 Programming the Transmitter
Create a Site
1. Press <Right Arrow> key and then <Up/Down Arrow> keys to select [Create/Name Site].
2. Press<Right Arrow> key to select the "?" symbol (see figure below).
3. To create site name use the <Up/Down Arrow> keys and <Right Arrow> keys to select a
4. Press <ENTER> key to save the Site name.
Note
To set English or Metric units: In [Meter Type] menu, scroll to [Meter Facilities] menu.
Press <Right Arrow> and select desired units. Press <ENTER> to select. Press <Left
Arrow> and <Up Arrow> keys to return to [Meter Type] menu.
Note
To select alphanumeric characters: Press <Right Arrow> key to cursor and then press
<Up/Down Arrow> keys to select letters and numbers.
5. Press <Left Arrow> key and return to [Channel Setup]. Press <Down Arrow> key to select
Note
After the site configuration procedures that follow are complete the newly created site
must be saved again to retain the new site data. Refer to the Save/Rename Site
procedure below.
Select Pipe Class
1. Press <Right Arrow> key to select [Pick Pipe Class].
2. Press <Right Arrow> key again. Press the <Up/Down Arrow> keys to scroll to desired
3. Press <ENTER> key to select Pipe Class.
18
name.
①
Site name filed is initially blank
②
(?) indicates cell is ready to accept data. Cursor shown in first character position.
[Pipe Data].
Pipe Class.
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 03/2012, A5E03086489-05