Quick Setup Guide TDL GPro™ 500
18
TB1
Pin 1
Connections on motherboard in the sensor head.
Note: T hesensorheadcoverofATEXversionshouldneverbeen
opened,asthiswillinvalidatetheATEXcertification.
TB2
Pin 1
Connections on IO board in the sensor head.
All openings have to be closed with certified cable glands
or blocking plugs of the same degree of certification as the GPro™ 500.
It is essential that you observe all provided information
and warnings. The system must be closed and grounded
Pin 4
Pin 12
WARNING
WARNING
before switching on the system.