3 Installation
3.1 Unpacking
Carefully unpack the meter. Keep the calibration certificate in a safe place.
Insert the right adapter clip into the power adapter slot:
3.2 Installing the Electrode Arm (optional)
The electrode arm can be fastened to FiveEasyPlus™ on the left or the right side.
1
Remove the electrode stand rubber cover on that side of the bench meter where you prefer the
stand. Keep the cover in a safe place.
2
Insert the electrode stand firmly into the opening as shown.
3
Fix the opening of the arm upon the stand from above, adjust it to a moderate height.
6
Installation