Mobile Terminal; Installing Trunnion; Figure 42: Terminal Into High Profile Trunnion (Gln7317_) - Motorola MTM800 FuG Installationshandbuch

84 | Radio Installation

Mobile Terminal

Without Ethernet Data Expansion
Head

Installing Trunnion

When and where to use: The trunnion allows the terminal to be mounted to various surfaces. The trunnion must be
securely fixed to the vehicle chassis.
Procedure:
1 Ensure that the surface can support the weight of the terminal.
Although the trunnion can be mounted to a plastic dashboard, it is recommended that the mounting screws be
located so they penetrate the supporting metal frame of the dashboard.
2 Ground the radio housing to the nearest vehicle chassis ground point, which can be done by removing the paint
from the trunnion where the radio and vehicle chassis touches the trunnion, or use a short cable with ring lugs in
both end and connect this to chassis under the wing screw.

Figure 42: Terminal into High Profile Trunnion (GLN7317_)

1
Number
1
2
Send Feedback | |
Fit Jumper Pins 6-15?
No
1
2
Description
Wing screws (0302637Y01), wing screws are included in Trunnion Mount Kit.
Trunnion — main part, Part Number. GLN7317_
Use Junction Box RS232 PEI?
Yes