Desktop Installation; Desktop Installation Planning - Motorola MTM800 FuG Installationshandbuch

3 Push the demount tools through the openings in the frame.
4 Slide out the radio.

Desktop Installation

The Desktop Station option provides the terminal with the desk microphone, power supply, desk top tray (without a
speaker) and external loudspeaker.
Caution: If an outdoor antenna is used a proper grounded Lightning Protector with Quarter-Wave Shorting
Stub must be inserted between the outdoor antenna and the transceiver antenna input. The line voltage
power supply shall have a proper ground connection (see IEC61312-1). The installation must meet the
requirements of any applicable local codes and regulations.

Desktop Installation Planning

Planning is the key to fast, easy terminal installation. Before a hole is drilled or a wire is run, inspect the location and
determine how and where you intend to mount the antenna, terminal, and accessories. Plan wire and cable runs to
provide maximum protection from pinching, crushing, and overheating. Only competent personnel, able to ensure that
the complete installation fulfils its regulatory requirements, such as EMC (Electro Magnetic Compatibility) and IEC
(International Electrotechnical Commission) can plan the installation.
Desktop Installation
When and where to use: Follow these steps to install the desktop station.
Procedure:
1 Be sure that line voltage power is available.
2 Make sure that sufficient air can flow around the terminal to permit adequate cooling.
3 Choose a flat surface for the desktop tray and external loudspeaker.
4 Be sure that the mounting surface is able to adequately support the weight of the terminal and tray.
5 In case of an outdoor antenna, choose a location for the terminal as close as possible to the antenna cable inlet of
the building. Make sure that the installation of the surge protector is in accordance with the manufacturer
specifications and safety hints. The line voltage power supply shall be grounded properly.
Radio Installation | 47
| | Send Feedback