Motorola MTM800 FuG Installationshandbuch Seite 60

60 | Radio Installation
Figure 18: The Accessories Expansion RECH Y-Cable
1
6
8
9
6
2
Number
1
2
3
Send Feedback | |
7
3 4 5
Item
Ethernet Remote Head with the cable connected (by the D-25 Connector)
Ground Wire and External Power Wire, Input supply 12V/24V: 2A — These connections
correspond to P4 and P5 detailed in
which provides the Pin Diagram of Cable PMKN4133. P4 is the 12/24V positive DC supply
input and P5 is Ground. This supply is for the Audio Power Amplifier and is required if a
Loudspeaker is to be connected to the RECH. This is the only Power connection that allows
12 or 24V operation, all other Power supplies must be 12V.
Speaker Wires — These connections correspond to P6 detailed in
Pin Diagram on page 111 and correspond to the Loudspeaker output of the RECH. The
Figure 63: RECH Y-Cable Pin Diagram on page 111
Figure 63: RECH Y-Cable
Table continued...