Cleaning/Maintenance; Cleaning & Maintenance; Cleaning; Cleaning/Replacing The Filter Insert Of The Dust Collection Box - Parkside PMFS 200 B2 Originalbetriebsanleitung

G B

Cleaning/Maintenance

Pull the mains plug before any ad-
justments, maintenance or repair.
Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
The following cleaning and servicing
should be done regularly. This will ensure a
long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably damage
the appliance.
• Clean the sanding sheet with a vacuum
cleaner or knock it out.
Cleaning/replacing the filter
insert of the dust collection
box
Check the filter insert once or twice a year
for contamination.
Removing the filter insert:
1. Pull the tab (9) and remove the
dust collection box lid (8) (see
"Connecting/removing/empty-
ing the dust collection box").
2. Pull the mounting frame (28) from
the dust collection box lid (8) and
1 4
remove the filter insert (29).
3. Wash the filter insert (29) with
warm water and soap and let it
dry.
Replace a heavily contaminated
or damaged filter insert (see
"Spare Parts/Accessories").
Installing the filter insert:
4. Replace the filter insert (29) and
the mounting frame (28) in the
dust collection box lid (8).
5. Then close the dust collection
box (10).

Storage

• Store the device in a dry place well out
of reach of children.
• Empty the dust collection box before
storing the device (see "Connecting/
removing/emptying the dust collection
box").
Waste disposal and
environmental protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines are not to be place with
domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out into
pure materials and recycling can be
implemented. Ask your Service Center
about this.
• Defective units returned to us will be
disposed of for free.