Control Panel; Switching The Milling Machine On; Switching The Milling Machine Off; Resetting An Emergency Stop Situation - Optimum optimill MH25V Betriebsanleitung

4.2.1 Control panel

Item Designation
13 Emergency stop button
16 Spindle rotation OFF
18 Spindle direction selection
4.3

Switching the milling machine on


Switch on the master switch.

Unlock the emergency stop button.

Close the spindle protection system.

Switch the control on.
4.4

Switching the milling machine off


Switch off the master switch.
 
"Switching-off and securing the milling machine" on page 56
CAUTION!
Only press the EMERGENCY STOP button in a genuine emergency. You should not use
the EMERGENCY STOP button to stop the machine during normal operation.
4.5

Resetting an emergency stop situation


Unlock the emergency stop button again.

Switch the control on again.

Switch on the spindle rotation again.
4.6

Power failure, Restoring readiness for operation


Switch the control on again.

Switch on the spindle rotation again.
4.7

Speed setting

The speed may be continuously adjusted in the range from 200 - 4000 rpm using the rotary
knob on the control panel.
Version 1.0.1 dated 2015-12-17
13
17
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
15
18
19
16
Item Designation
15 Spindle rotation ON
17 Spindle speed setting
19 Control ON
MH25V GB
Page 67