Operation; Safety; Control And Indicating Elements - Optimum optimill MH25V Betriebsanleitung

OPTIMUM
M A S C H I N E N - G E R M A N Y
4

Operation

4.1

Safety

The milling machine must only be operated under the following conditions:

The milling machine is in proper working order.

The milling machine is used as intended.

The operating instructions are followed.

All safety devices are installed and activated.
Eliminate or have all malfunctions rectified promptly. Stop the milling machine immediately in
the event of any abnormality in operation and make sure it cannot be started up accidentally or
without authorisation.

"For your own safety during operation" on page 56
4.2

Control and indicating elements

Item Designation

1
Control panel
3 Milling head height adjustment hand crank
5 - 6 Hand crank for miling table
GB MH25V
Page 66
2
4
6
"Control panel" on page 67
Original operating instructions
3
7
Item Designation
2 Rev counter
4 Spindle protection
7 Opening Tool quick clamping system
1
5
Version 1.0.1 dated 2015-12-17