Parkside PKGA 20-Li B1 Originalbetriebsanleitung Seite 10

IE NI CY
are familiar with the pow-
er tool after using it many
times. Careless action can
lead to serious injuries within a
fraction of a second.
4) POWER TOOL USE AND
CARE
a) Do not force the power
tool. Use the correct pow-
er tool for your applica-
tion. The correct power tool
will do the job better and safer
at the rate for which it was de-
signed.
b) Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c) Remove the plug from
the wall socket and/or
remove the recharge-
able battery before you
change the device's set-
tings, change accessory
parts or put away the
power tool. Such preventive
safety measures reduce the risk
of starting the power tool acci-
dentaIly.
d) Store idle power tools out
of the reach of children
and do not allow persons
10
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e) Look after the power tool
and application tool care-
fully. Check for misalign-
ment or binding of mov-
ing parts, breakage of
parts and any other con-
dition that may affect the
power tool's operation.
If damaged, have the
power tool repaired be-
fore use. Many accidents are
caused by poorly maintained
power tools.
f) Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, acces-
sories and tool bits etc. in
accordance with these in-
structions, taking into ac-
count the working condi-
tions and the work to be
performed. Use of the power
tool for operations different
from those intended could result
in a hazardous situation.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.