Trouble Shooting; Error Correction - Parkside PKGA 20-Li B1 Originalbetriebsanleitung

IE NI CY

Trouble Shooting

Problem
Appliance doesn't
start
Appliance works
with interruptions
Tool does not
move although the
motor is running
Low appliance
power
Tool wears down
quickly
24
Possible Cause
Rechargeable battery
( 9) discharged
Rechargeable battery
( 9) not inserted
On/off switch (
broken
Internal lose contact
On/off switch (
broken
Appliance attachment or
tool not correctly mounted
Tool unsuitable for the
workpiece to be worked on
Tool blunt or worn down
Incorrect speed
Low battery power
Tool unsuitable for the
workpiece to be worked on
Too much pressure applied
Speed too high

Error correction

Charge rechargeable battery (observe
the separate operating instructions for
the rechargeable battery and charger)
Insert rechargeable battery
the separate operating instructions for
the rechargeable battery and charger)
10) is
Repair by Service Centre
Repair by Service Centre
10) is
Fit the appliance attachment or tool
correctly (see „Operation")
Insert a suitable tool
Insert a new tool
Adjust speed
Charge battery (
separate operating instructions for the
rechargeable battery and charger)
Insert a suitable tool (see „Operation")
Reduce the pressure
Reduced speed
(observe
9) (observe the