General Description; Scope Of Delivery; Overview; Technical Data - Parkside PKGA 20-Li B1 Originalbetriebsanleitung

General Description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.

Scope of delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Motor unit with drill attachment
• Sabre saw attachment
• Multi-sander attachment
• Multifunction tool
• Accessories for drill attachment
- 6 drill bits (1,5/2/3/4/5/6 mm)
- 6 screwdriver bits, 50 mm
- Bit holder
• Accessories for sabre saw attachment
- Wood sawblade (HCS150/6TPI)
- Metal sawblade (HSS150/18TPI)
• Accessories for multi-sander attachment
- 5 sanding sheets
(2 x P* 60, 2 x P 120, 1 x P 240)
• Accessories for multifunction tool
- Plunge sawblade
- Scraper blade
- Delta sanding plate with 3 sanding
sheets (1 x P* 60, 1 x P 80, 1 x P 120)
• Rechargeable battery
• Charger
• Storage case
• Instruction Manual

Overview

1 Keyless chuck
2 Torque adjustment ring
3 Gear selection switch
4 Drill attachment PKGA1
*P = Grain size
5 Unlocking lever for appliance at-
tachment
6 Motor unit
7 Direction switch
8 Handle
9 Rechargeable battery
10 On/off switch
11 Bit holder
12 Screwdriver bits, 50 mm, 6 no.
13 Drill bits 6 no.
14 Charger
15 Storage case
16 Sabre saw attachment PKGA3
17 Footplate
18 Lever for unlocking sawblade
19 Metal sawblade
20 Wood sawblade
21 Sanding plate
22 Multi-sander attachment PKGA2
23 5 sanding sheets
24 Dust extraction adaptor
25 Reducer
26 Multifunction tool PKGA4
27 Lever for unlocking tool
28 Arbor
29 Tool holder
30 Delta sanding plate
31 3 sanding sheets
32 Scraper blade
33 Plunge sawblade

Technical Data

4-in-1 Cordless
combination tool ................. PKGA 20-Li B1
Motor voltage ............................. 20 V
Idling speed (n ) ....................21000 min
0
Motor unit with drill attachment ..... PKGA1
Idling speed (n ) ........ 0-400/0-1350 min
0
Torque ................................ max. 25 Nm
Spread drill chuck .................. 1.0-10 mm
IE NI CY
5
-1
-1