Cleaning/Maintenance; Cleaning; Maintenance; Storage - Parkside PKGA 20-Li B1 Originalbetriebsanleitung

IE NI CY
for fine sanding of primed
P 240
and painted surfaces
Scraping
• Use a high oscillation rate when scrap-
ing.
• Work using low pressure and at a low
angle in order not to damage the sub-
strate material.

Cleaning/Maintenance

Repair and servicing work not
described in this manual should
always be carried by our Service
Centre. Use only original parts.
Switch off the device and remove
the battery from the device before
working with or transporting it.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.

Cleaning

Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
20

Maintenance

• The equipment is maintenance free.

Storage

• Store the device in a dry place well out
of reach of children.
• Store the equipment between 0 °C and
45 °C. During storage, avoid extreme
cold or heat so the battery does not
lose power.
Waste Disposal/Envi-
ronmental Protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Electric units do not belong with
domestic waste.
• Remove the rechargeable battery be-
fore disposing of the appliance.
• Return the unit and the recharger to a
recycling centre. The plastic and metal
parts employed can be separated out
and thus recycled use can be imple-
mented. Ask our Service-Center for
details.
• Defective units returned to us will be
disposed of for free.