Beha-Amprobe AT-7030-EUR Bedienungsanleitung Seite 34

5. MAINTENANCE
Changing receiver battery:
The battery compartment on the back of the AT-7000-RE is designed to make changing
batteries easy. Four (4) AA 1.5V alkaline or 1.2V rechargeable batteries may be used.
Battery Cover
1. Make sure that the Receiver is turned off.
2. Use screw driver to unscrew the captive screw.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the provided screw.
Figure 5.2: Changing receiver battery
30
Screws
4 x AA batteries