Beha-Amprobe AT-7030-EUR Bedienungsanleitung Seite 33

5. MAINTENANCE
Changing battery for transmitter:
The AT-7000-TE battery compartment was designed to make it easy for the user to change
or charge the batteries. Two screws secure the battery door in case the unit is dropped. 6 AA
rechargeable batteries or 6 AA alkaline batteries may be used.
Battery Cover
� Warning: To avoid shock, injury, or damage to the Transmitter, disconnect test leads
before opening case.
1. Disconnect all test leads from the Transmitter."
2. Make sure that the Transmitter is turned off.
3. Use the star screw driver to unscrew the holding screws.
4. Remove the battery cover.
5. Install Batteries.
6. Replace the battery cover and secure it with the provided screw.
29
Screws
6 x AA batteries