Scope Of Delivery; Design Of The Spray Gun - SATA SATAjet 1000 K RP Betriebsanleitung

Operating instructions SATAjet 1000 K RP/HVLP, SATAjet 1000 H RP
EN EN
RP
HVLP
Air consumption jet 1000 H RP at 2.0 bar spray gun inlet pressure
H RP
Maximum temperature of spray medium
Compressed air connection
Material connection
3.

Scope of Delivery

SATAjet 1000 K:
• Spray gun with nozzle set
RP / HVLP
• Operating Instructions
• Tool kit
• CCS clips
4.

Design of the Spray Gun [1]

[1-1] Spray gun handle
[1-2] Trigger
[1-3] Material connection
[1-4] Nozzle set consisting of air
cap, fluid tip (not visible),
paint needle (not visible)
[1-5] Round/flat spray control
[1-6] Material flow control screw
[1-7] Material flow control counter
nut
[1-8] Air micrometer
[1-9] Air micrometer (air flow con-
trol) locking screw
106 106
410 Nl/min
530 Nl/min
275 Nl/min
50 °C
G 1/4 Male thread
G 3/8 Male thread
SATAjet 1000 H RP
• identical to jet 1000 K RP, howev-
er with 1 l aluminium suction cup,
strainer and anti-drip device
[1-10] Air piston (not visible)
[1-11] Compressed air connection
[1-12] ColorCode-System (CCS)
[1-13] Strainer (not visible)*
[1-14] Suction cup*
[1-15] Anti-drip device (not visible)*
[1-16] Suction cup lid*
[1-17] Clamping yoke (lock of the
lid)*
[1-18] Suction cup connection*
*only with jet 1000 H RP