Setting The Spreader Type; Drive Shaft Pulses - Vicon RS-ED 825 Betriebsanleitung

UK
Pressing once more will call up the following screen:
For RS - M
For RS - XL
This screen shows the number of pulses per drive shaft revolution of the spreader type on which you use the ED 825
system.
NOTE: The ED 825 system calculates the disc rpm on the basis if this information.
After resetting to the default values, the spreader type must be reselected. Select with
Battery alarm level
Pressing once more will call up the following screen:
This screen shows the battery voltage at which the alarm is triggered.
Change with or
Pressing once more will call up the following screen:
This is the total number of hectares that you have spread. You cannot reset this value.
Then some service functions follow.
- You can leave the selection menu by pressing one of the four readout keys.
DRIVE PULSES =
DRIVE PULSES =
Batt alarm =
and confirm with .
TOT. Ha=
1
or
2
9
or and confirm with .
47