The Control Box - Vicon RS-ED 825 Betriebsanleitung

UK
1.1

The control box

1 = START
2 = calibration test
3 = selection special functions
4 = 16 characters display with lighting
5 = over/underapplication in kg/ha
6 = correction
7 = increase value
8 = STOP
9 = switch left-hand actuator on or off
10 = switch right-hand actuator on or off
11 = forward speed in km/h
12 = application rate in kg/ha
13 = area covered in ha
14 = distance covered in m
15 = confirm change
16 = decrease value
At , , and
The indicator light above over/underapplication indicates whether over/underapplication takes place. The indicator
light above blinks when the value on the display has been changed. Press
change to be saved. If you don't, the previous value will be restored.
red indicator lights are mounted which light up when the connected function is active.
to confirm when you want this
33