Introduction; Setup And User Guide; Product And Function Descriptions - Dantherm CDT 30S MKII Serviceanleitung

Product and function descriptions

Introduction

This section provides a product description of the CDT 30S/40SMKII, plus a description
of its functionality.
How it works Air flow through the dehumidifier:
The fan draws humid air through a fil-
ter inside the dehumidifier.
The air is cooled, causing the moisture
content to condense into drops of wa-
ter, which are collected in the water
container.
The air is reheated using heat from the
dehumidifier's operation (temperature
increase of approx. +5 °C), and the
option of further heating using the in-
tegrated heating element.
As the air is repeatedly circulated through the dehumidifier, its moisture content is re-
peatedly reduced, resulting in rapid, gentle drying. The dehumidifier can run constantly,
or be controlled by a built-in hygrostat.
Illustration Illustration of dehumidifier:
2

Setup and user guide

How the air changes as it passes
through the dehumidifier:


Type plate behind water container
Rear view
www.dantherm-ltd.ru • info@dantherm-ltd.ru • +7 (495) 545-48-79
Москва. Каширский проезд д. 19 стр. 2
Handle
Control panel
Air intake with PPI filter
behind grille
Power cord
Data socket
remote monitoring
Air exhaust
Water container
Wheel
Front view
Continued on next page