Dantherm CDT 30S MKII Serviceanleitung Seite 8

Preparation and transportation guide,
Position Position the dehumidifier where there is plenty of air circulation around it, with mini-
mum 60 cm of clearance on the air intake side, and 3 meters of clearance on the ex-
haust side if no flexible ducts are attached.
Optimum operation Ensure the room to be dehumidified is sealed, and that the machine is not located near
a heat source, such as radiators.
If flexible ducts are attached, performance will be significantly impaired if they exceed 5
metres in length.
Electrical connection The machine comes complete with a 3.5m power cord, and can be connected to any 230
V, 50 Hz socket with a 10-16A fuse.
Stairs The wheels are positioned such that the machine can be pulled upstairs without damage
to the cabinet or stairs.
Transporting or The machine can be moved by two people or using a crane. See the instructions below:
moving the dehu- Be aware of any local safety regulations with regard to lifting!
midifier
6
cont.
2 people
www.dantherm-ltd.ru • info@dantherm-ltd.ru • +7 (495) 545-48-79
Москва. Каширский проезд д. 19 стр. 2
Hoist/crane
Lifting using a cargo strap
Continued on next page