Jøtul I 520 Handbuch Seite 27

Fig. 37
8. If installing as shown in example 3, we recommend threading
the flue pipe in through the door opening of the burn
chamber. Push the flue pipe with the smoke bell on in through
the door opening and the opening for the smoke bell and any
insulation material and up inside the chimney.
Fig. 38
B
9. Push the key (A) up through the opening in the baffle, turn
it and secure it.
10. Insert the side burn plates (B) into place.
When building a brick surround
If building a brick surround, a leg rack (optional, item no.
51044759) must be used. NB: Maximum leg length must be used!
See Fig. 1 e and 1 f. The base is designed so that space is left to the
bricks on the inside of the frame that is provided.
Fig. 39
1. The bricks are laid so that they fit under the insert frame.
Fig. 40
A
2. The last bricks (A) are cut to fit between the leg base and the
frame. NB: Remember to leave openings in the brickwork for
convection air (Fig. 1 e and f).
ENGLISH
A
27