Fig. 18
2
6. Lower the exhaust deflector and lift it out.
Fig. 19
7. Remove the two screws (A) on either side of the smoke bell
and lift it off.
Fig. 20
8. Secure the smoke bell from the inside.
A
Fig. 21
9. Screw the same screws (A) in from the inside.
Levelling the insert
It is important that the insert is level when installing it inside a
brick or prefabricated surround and hearth/open fireplace.
Fig. 22
1. Lift the air duct (A) up and remove it.
ENGLISH
A
A
17