Outside Air Connection; External Air Supply - Jøtul I 520 Handbuch

4.7 Preparation/installation
The product comes in one package.
Fig. 2 - a
All the packaging can be recycled.
Fig. 2 b
The product is heavy! Ensure you have help when positioning
and installing it.
NB: Before installing the fireplace, check it carefully for any signs
of damage.

Outside air connection

An optional outside air connection kit is available to order.
(Comes with its own manual - Outside air connection Ø 100, item
no. 10026187). The duct connector fits Ø100 and Ø 80 fresh air
intake tubes.
This is done before bricking in or building the surround.
Full compliance with fire codes and regulations is essential if
installing in a pre-existing hearth (open fireplace).

External air supply

Fig. 3
1. The product has an air intake (A) at the rear. If necessary,
the air intake can be moved to the bottom of the product.
See Fig. 4
Fig. 4
2. Unscrew the two screws (B) and remove the air intake
connector (A).
3. Then unscrew the two screws (D) beneath the burn chamber
and remove the cover (C).
4. Install the connector (A) beneath where the cover was placed
and secure the connector with screws (B).
5. Then secure the removed cover over the air intake hole at the
ENGLISH
A
B
A
C
D
11