Jøtul I 520 Handbuch Seite 26

ENGLISH
Fig. 33
3. Slide the burn chamber in on the moulded runners on the
bottom until it is in place. Level the burn chamber as described
in "Levelling the insert".
Fig. 34
A
4. Fit the gasket (A) onto the edge of the flue pipe.
26
Fig. 35
5. Attach the smoke bell (A) to the end of the flue pipe where
the gasket is fitted.
6. Attach the flue pipe with the smoke bell on from the inside
of the burn chamber.
Fig. 36
A
7. Then attach the smoke bell using the screws (A) that had
previously been removed when it was taken off the top outlet.
A