Fig. 11
Top outlet
180 o
4. Lift the smoke bell up and rotate it 180°.
Fig. 12
5. Screw the smoke bell onto the burn chamber again using the
same two screws (A).
Rear outlet
A
4.9 Installation
Installation of internal smoke bell
The product comes in four different models. The installation
procedure depends on which model is being fitted:
For the following three models, follow Figures 13 to 20.
•
For the Jøtul I 520 F (glass in the front), Jøtul I 520 FL (glass in
the front and left side) and Jøtul I 520 FR (glass in the front
and right side).
•
For the Jøtul I 520 FRL (glass in front and on both sides), follow
Figures 14 to 20.
Fig. 13
1. Open the door and remove the log retainer (A).
ENGLISH
A
15