testo 252 Bedienungsanleitung Seite 138

Description
Storage solutions, electrolyte, buffer (continuation)
DIN buffer set pH 4.008/pH 6.865 (250 ml each)
DIN buffer set pH 6.865/pH 9.180 (250 ml each)
Storage solution (50 ml) for electrodes type 01, 02, 04, 06
(refill solution for type 02)
Storage solution (50 ml) for type 03 electrodes
Storage and refill solution (50 ml)
for electrodes type 05
Conductivity standard (1413 mS/cm)
0.01 mol/l KCI, for calibration of conductivity sensors
Redox standard 358 mV (50 ml),
for calibration of redox electrodes
Description
Pt100 temperature probes
Type 04 immersion probe
for quick measurements in liquids and powdery
substances, l = 150 mm, Ø 3 mm, t
Type 15 immersion probe
specially for use in laboratories, probe shaft halar-coated
210 mm, Ø 4 mm, t
Type 25 penetration probe
with sharpened measuring tip, V4A material,
water-resistant, boil-proof 150 mm, Ø 3 mm, t
Type 97 air probe
for quick air measurements
l = 150 mm, Ø 9 mm, t
Type 99 surface probe
for measurements on metallic surfaces
l = 150 mm, Ø 8 mm, t
66
99
= 10 sec.
99
= 75 sec.
99
= 40 sec.
99
*Accuracy of Pt100 probes according to DIN IEC 751, class A
Meas. range
-50 to +400 ° C*
= 7 sec.
-50 to +160 ° C*
-200 to 600 ° C*
-330 to +1110 °F
= 30 sec.
99
-50 to +600 ° C*
-60 to +1110 °F
-50 to +400 ° C*
Ordering data
Part no.
0554.2339
0554.2340
0554.2332
0554.2318
0554.2319
0554.2334
0554.2333
Part no.
-60 to +750 °F
-60 to +320 °F
-60 to +750 °F
0605.0473
0605.1570
l =
0605.2573
l =
0605.9773
0605.9973