Conductivity Measurement; Preparing A Conductivity Measurement; Storing Cell Constants - Testo 252 Bedienungsanleitung

Conductivity measurement

Preparing a conductivity measurement

Storing cell constants

The cell constant of the conductivity sensor varies
depending on the type and production batch. The
cell constant is indicated on the identification label
or the cable of the conductivity sensor and must
be stored in the instrument before the first
measurement (and each time a different
conductivity sensor is connected).
Switch on the measuring instrument.
You are now in the measuring mode.
Select the calibration menu via the arrow key .
By pressing the arrow/print key you will enter the
Conductivity calibration mode (Cal cond)
Confirm the selection of the Conductivity Cell
constant mode with Enter.
34