testo 252 Bedienungsanleitung Seite 137

Description
Electrode for solids and semi-solids
Typ 03 penetration electrode
highly-accurate glass electrode with solidified inner
buffer, short response times, insensitive to dirt, incl.
standard probe sleeve adapter and storage cap, without fixed cable
without fixed cable
Application range: 0 to +40 °C/+32 to +104 °F (short-term +60 °C/+140 °F)
Description
Redox electrode
Type 06 redox electrode
rugged glass electrode, insensitive to electrode poisoning
due to two chamber system, incl. standard probe sleeve
adapter and storage cap without thermometer, without fixed cable
Application range: 0 to +80 °C/+32 to 175 °F
Description
Electrode accessories
S7-BNC electrode cable
necessary for electrodes without fixed cable
Electrode cable S7-BNC (5 m)
Description
Conductivity sesnors
Type 08 conductivity sensor
with glass shaft, highest level of accuracy up to
Type 11 conductivity sensor
with plastic shaft, highest level of accuracy up to
Description
Storage solutions, electrolyte, buffer
Testo buffer set pH 4/pH 7 (50 ml each)
Testo buffer set pH 4/pH 7/pH 10 (50 ml each),
Testo buffer pH 2 (50 ml)
Testo buffer set pH 4/pH 7 (500 ml each)
Testo buffer set pH 7/pH 10 (500 ml each)
Ordering data
Meas. range Part no.
pH 2 to 14
0650.0225
Meas. range Part no.
0650.2523
±1999 mV
Meas. range Part no.
0554.2317
Meas. range Part no.
600 mS/cm
300 mS/cm
Part no.
0554.2321
0554.2320
0554.2322
0554.2337
0554.2338
0650.3025
0650.3026
65