Programming; Programming Procedure - Sirona Orthophos Plus Gebrauchsanweisung

Sirona Dental Systems GmbH
7

Programming

P I
62
I6
3.
60 82 023 D3297
D3297.201.01.11.02
In the factory kV/mA values have been assigned to the
four program buttons.
For free programming the buttons can be programmed
with different values. See 'Program Values'.

Programming Procedure

1. Push buttons – + to select program number P1 ... to
be changed.
2. Push – + buttons to set desired kV/mA value on
the digital display.
1.
3. Push memory button. The LED over the memory
button blinks.
4. Push the patient symbol button to be repro-
2.
grammed.
The LED above this button lights up.
The LED above the memory button is switched off.
The new values are now stored.
4.
Programming is complete.
Please enter the new values in the 'Freely programmed
values' table.
7 Programming
39