Introduction; Intended Use; Features; Package Contents - Parkside PABS 16 A2 Betriebsanleitung

CORDLESS DRILL PABS 16 A2

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for inserting, tightening
and loosening screws as well as drilling in wood,
metal, ceramics and plastics. The light on this appli-
ance is intended to illuminate the immediate work
area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.

Features

Speed selector
Bit holder (magnetic)
Battery display LED
Rotation direction switch/lock
ON/OFF switch / Speed control
Battery pack
Release button for battery pack
LED work light
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
■ 14 │ GB

Package contents

1 cordless drill PABS 16 A2
1 high-speed battery charger PABS 16 A2-2
1 battery pack PABS 16 A2-1
1 bit PZ2 50 mm
1 carrying case
1 set of operating instructions

Technical data

Cordless drill:
Nominal voltage:
Gearbox:
Idle speed:
Max. torque:
Chuck clamping
range :
Drill diameter:
Battery: PABS 16 A2-1
Type:
Nominal voltage:
Capacity:
High-speed battery charger: PABS 16 A2-2
INPUT:
Nominal voltage:
Power consumption:
OUTPUT:
Nominal voltage:
Charging current:
Charging time:
Fuse (internal):
Protection class:
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level:
Sound power level:
Uncertainty K:
PABS 16 A2
16 V (DC)
2 speed gearbox
1st gear: n 0–400 rpm
0
2nd gear: n 0–1300 rpm
0
25 Nm
max. Ø 10 mm
Steel: 10 mm
Wood: 25 mm
LITHIUM ION
Lithium
16 V (DC)
2.0 Ah
230–240 V ~ 50 Hz
(AC)
45 W
17 V (DC)
2.4 A
approx. 60 min
T2A
2 A
II /
L = 68 dB(A)
PA
L = 79 dB (A)
WA
K = 3 dB
PABS 16 A2