Introduction; Intended Use; Features; Package Contents - Parkside PABS 20-LI B2 Originalbetriebsanleitung

CORDLESS DRILL PABS 20-LI B2

Introduction

Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is designed for screwing and drill-
ing into wood, plastic and metal. Use this product
only as described and for the areas of applications
specified. Any other usage of or modification to the
appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer ac-
cepts no responsibility for damage(s) attributable
to misuse. This appliance is not intended for com-
mercial use.

Features

Gear selector
Bit holder (magnetic)
Rotational direction switch/lock
ON/OFF switch/speed control
Belt clip
Battery charge level button
Battery display LED
Battery pack
Release button for battery pack
LED work light
Chuck
Torque selection ring
High-speed charger
Red charge control LED
Green charge control LED
│
■ 2 GB
All manuals and user guides at all-guides.com

Package contents

1 cordless drill PABS 20-Li B2
1 high-speed battery charger PABS 20-Li B2-2
1 battery pack PABS 20-Li B2-1
1 bit PH2 50 mm
1 carrying case
1 set of operating instructions

Technical details

Cordless drill:
Rated voltage:
Rated idle speed:
Chuck clamping
range
Max. drill diameter:
Battery: PABS 20-Li B2-1
Type:
Cells
Rated voltage:
Capacity:
Energy value:
High-speed battery charger: PABS 20-Li B2-2
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
PABS 20-Li B2
20 V (DC)
1st gear: n 0–400 rpm
0
2nd gear: n 0–1400 rpm
0
: max. Ø 13 mm
Steel: 13 mm
Wood: 30 mm
LITHIUM ION
5
20 V (DC)
2.0 Ah
40 Wh
230–240 V ~ , 50 Hz
(AC)
65 W
T2A
2 A
21,5 V (DC)
2.3 A
approx. 60 min.
II / (double insulation)
PABS 20-LI B2