CORDLESS DRILL DRIVER
SET 20V PABS 20-Li F7
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a highquality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product, please
familiarise yourself with all of the operating and
safety instructions . Use the product only as
described and for the range of applications speci
fied . Please also pass these operating instructions
on to any future owner .
Intended use
This appliance is designed for screwing and drilling
into wood, plastic and metal . The appliance may
only be used as described and for the specified
application areas . Any other usage of or modifica
tion to the appliance is deemed to be improper
and carries a significant risk of accidents .
The manufacturer accepts no responsibility for
damage caused by incorrect use of the appliance .
This appliance is not intended for commercial use .
Features
1 Speed selector switch
2 Bit holder (magnetic)
3 Rotation direction switch/lock
4 ON/OFF switch/speed control
5 Belt clip
6 Battery charge level button
7 Battery display LED
8 Battery pack (2x)
9 Battery pack release button
0 LED work light
■
16
│
GB │ MT
q Chuck
w Torque preselection ring
e Highspeed charger
r Red charge control LED
t Green charge control LED
z Replacement lead for pencil
u Cutter knife
i Tape measure
o Centre punch
p Countersink
Socket wrench set
20a
a 75 mm bits
s 50 mm bits
d Metal drill set
f Bit holder
g 25 mm bits
h Wood drill set
j Carpenter's pencil
Package contents
1 cordless drill driver 20V
1 highspeed battery charger
2 battery packs
1 bit holder
20 bits (25 mm)
10 bits (50 mm)
10 bits (75 mm)
1 cutter knife
1 carpenter's pencil incl . 2 spare leads
1 tape measure (5 m)
8 socket wrench set
1 countersink
1 centre punch
Set of 5 wood drills
Set of 14 metal drills
1 carrying case
1 set of operating instructions
PABS 20-Li F7