Before Using For The Fi Rst Time; Unpacking; Assemble The Stand For The Fl Oor Steam Cleaner; Use - Cleanmaxx SM102B Gebrauchsanleitung

Before using for the fi rst time
Before using the appliance you must:
• unpack the purchased parts,
• assemble the stand for the fl oor steam cleaner.

Unpacking

CAUTION!
❐ Keep children away from the packaging material. It represents a hazard, including risk of
suffocation.
Unpack all the parts and check the purchased parts for completeness (see chapter "Equipment
overview and parts purchased") and for transport damage. If there is damage to any of the
parts, do not use them(!); contact customer services instead.
Assemble the stand for the fl oor steam cleaner.
The stand for the fl oor steam cleaner is supplied in three parts: the handle (18), the middle
piece (14) (with base unit), and the cleaning head (6).

Use

CAUTION!
❐ Always check the fl oor cleaning cloth for wear before each use. It must not be used if it is
visibly worn or damaged. This could result in damage to your fl oor covering.
❐ The steam cleaner should only be used with fl oor cleaning cloths specifi cally manufactured
for it.
02626_DE-GB-FR-NL_V0.indb 21 02626_DE-GB-FR-NL_V0.indb 21
1. Insert the handle onto the middle piece and screw both
parts together. To do this, insert the screw supplied into
the side hole of the handle (and middle piece) and turn it.
2. Insert the steam outlet nozzle at the bottom end of the
middle piece into the adapter of the cleaning head. You
must hear it click into place.
3. To put the appliance away, wind the power cable (10)
loosely around the top and bottom hooks provided for
holding the cable.
• If you want to remove the cleaning head, press the unlatch-
ing lever (15) where the cleaning head joins the middle
piece and remove it.
21
26.10.12 07:30 26.10.12 07:30