Cleanmaxx SM102B Gebrauchsanleitung Seite 23

5. In order to quickly unreel the power cable, twist the top hook for holding the cable (12)
downwards.
6. Press the power cable into the cable holder (19), so that you can manipulate the fl oor
cleaner better and not trip over the cable.
7. Insert the plug into a properly installed and easily accessible plug socket.
10. When the appliance has reached its operating temperature, steam is emitted when the
steam activator (20) is pressed. You can now start cleaning the fl oor.
11. Slowly move the cleaning head backwards and forwards over the surface to be cleaned (do
not press down hard!) and press the steam activator as required.
13. When you want to replace or rinse out the fl oor cleaning cloth, switch the appliance off
with the on/off switch (position 0) and remove the plug from the plug socket. Never pull on
the cable, always pull at the plug. Wait a few minutes so that the appliance and fl oor cleaning
cloth can cool down. Be aware that when turning off the appliance a wet area can
form beneath the cleaning head. Afterwards you can replace the fl oor cleaning cloth.
14. Once the water tank is empty and steam is no longer being generated, switch the appli-
ance off, pull the plug out of the plug socket and wait until the appliance has cooled down.
Then remove the water tank and refi ll it with water (see chapter "Use", section "Filling
the water tank").
15. If the cleaning process has fi nished and the appliance has completely cooled down, remove
the water tank, empty it and let it dry.
16. Turn the top hook for holding the cable upwards and roll up the cable.
17. Remove the fl oor cleaning cloth from the cleaning head and rinse it out (see chapter
"Cleaning and storage").
02626_DE-GB-FR-NL_V0.indb 23 02626_DE-GB-FR-NL_V0.indb 23
2. Insert the base unit's steam outlet nozzle into the adapter in
the bottom part of the stand for fl oor cleaning.
3. Press the handle of the base unit into the stand until you
hear the locking mechanism click into place.
4. Pull the fl oor cleaning cloth (16) over the cleaning head and
tighten the rubber spring.
When you want to remove the fl oor cleaning cloth, press the
catch on the rubber spring to release the cloth.
8. Move the on/off switch (17) to position 1. The indicator lamp
(9) on the front of the appliance lights up and the appliance
heats up.
9. Release the standing position by placing your foot on the
cleaning head and tilting the stand.
12. For cleaning carpets, insert the cleaning head (with the fl oor
cleaning cloth) into the carpet glider (7).
23
26.10.12 07:30 26.10.12 07:30