DAB JET 151 Installationsanweisung Und Wartung Seite 11

CONTENTS
1. PUMPED FLUIDS
2. TECHNICAL DATA AND RANGE OF USE
3. MANAGEMENT
3.1 Storage
3.2 Transport
3.3 Weights
3.4 Checking motor shaft rotation
4. INSTALLATION
5. ELECTRICAL CONNECTION
6. STARTING UP
7. PRECAUTIONS
8. MAINTENANCE AND CLEANING
9. MODIFICATIONS AND SPARE PARTS
9.1 Removal and replacement of the supply cable
10. TROUBLESHOOTING
1. PUMPED FLUIDS
The machine has been designed and built for pumping water, free from explosive substances and solid particles or fibres,
with a density of 1000 kg/m³ and a kinematic viscosity of 1 mm²/s, and chemically non-aggressive liquids.
2. TECHNICAL DATA AND RANGE OF USE

Supply voltage:

Absorbed power:

Delivery:

Head up – Hmax (m):

Pumped liquid:

Degree of motor protection:

Degree of terminal board protection:

Protection class:

Cable clamp:

Storage temperature:

Liquid temperature range:


Noise level:


Motor construction: in conformity with standards CEI 2-3 - CEI 61-69 (EN 60335-2-41).

The leads of the supply cables must have a rated section no smaller than that illustrated in the following table:
Rated current of the appliance A
≤ 0,2
> 0,2 and ≤ 3
> 3 and ≤ 6
> 6 and ≤ 10
> 10 and ≤ 16
> 16 and ≤ 25
> 25 and ≤ 32
> 32 and ≤ 40
> 40 and ≤ 63
3. MANAGEMENT
3.1 Storage
All the pumps must be stored indoors, in a dry, vibration-free and dust-free environment, possibly with constant air humidity.
They are supplied in their original packaging and must remain there until the time of installation. If this is not possible, the intake and delivery
aperture must be accurately closed.
3.2 Transport
Avoid subjecting the products to needless jolts or collisions.
To lift and transport the unit, use lifting equipment and the pallet supplied standard (if applicable).
3.3 Weights
The adhesive label on the package indicates the total weight of the electropump.
220 - 240V 50Hz / 110V 50Hz
115V 60Hz / 230V 60Hz / 230 V3 – 400 V3 50/60Hz
115-127 V 60 Hz / 220-230V 60Hz / 220-277/380-480V 60Hz
see electrical data plate
from 0,06 to 37 m
pag. 72
clean, free from solid bodies or abrasive substances, non-aggressive.
IP44 (For IP55 see plate on package)
IP55
F
PG 11 and/or PG 13.5, depending on models
-10°C to 40°C
pag. 73
For pumps intended for outdoor use: noise emission according to Directive 2000/14/CE.
For other pumps: noise emission according to Directive EC 89/392/CEE and subsequent amendments.
Rated section mm²
Flat twin tinsel cord
0,5
a
0,75
1,0 (0,75)
1,5 (1,0)
b
2,5
4
6
10
ENGLISH
/h
3

Relative humidity of the air: MAX. 95%

Maximun operating pressure: pag. 73
a
a
These cables may be used only if their length does not exceed
2 m between the point in which the cable or its sheath enters the
appliance and its entry in the plug.
b
b
The cables with the sections indicated in brackets may be used
for mobile appliances if their length does not exceed 2 m.
7
page
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
see electrical data plate