Cleaning; Storage; Spare Parts; Waste Disposal And Environmental Protection - Grizzly ERT 45 Pro Bedienungsanleitung

GB
3. The guard with the line reel is not
screwed on and is easy to remove. Push
both catches on the side of the cutting
head at the same time, and remove the
line reel with the guard (1).
4. Remove the guard (2) and carefully
clean it on the inside.
5. Insert the new spool coil into the cover
casing and insert the two line ends
through the line-outlet lug. Ensure that
the line ends do not slide from the slots
of the white retaining ring on the spool.
6. Place the guard with the new reel onto
the cutting head. Make sure that the
catches fit exactly into the notches on
the cutting head. They should then
audibly click into place. If this is not the
case, twist the reel by the approximately
half an inch to an inch, and place the
guard back onto the cutting head.
Check the line cutter. Do not employ the
device under any circumstances without
line cutter or with defective line cutter. If the
line cutting blade is damaged or is broken
off, it is absolutely necessary that you refer
to one of our service stations.

Cleaning

Clean and maintain your device regularly. This guar-
antees its performance capability and a long life.
• After every cutting procedure, clean grass and
earth off the cutting equipment and the protec-
tive cover.
• Keep the ventilation slots clean and free from
grass.
• Clean the device with a soft brush or a cloth.
• The device must not be washed down with wa-
ter and neither may it be placed into water.
• Do not employ any cleaning agent and solvent.
They could damage the device irreparably.
Chemical substances can attack the plastic
parts of the device.
38 38

Storage

• Clean the device and the accessories carefully
after every use (see chap. on maintenance
and cleaning). In this way you can prevent the
formation of mildew.
• Keep the device in a dry and dustproof loca-
tion and out of the reach of children.
• Do not store the trimmer for a long period in di-
rect sunlight.
• Do not cover the device with plastic bags,
since this could generate humidity and mold.
• Do not place the device on the protective
cover. The best thing is to suspend it from the
upper handle so that the protective cover does
not come in contact with any other objects.
The danger exists otherwise that the protective
cover will deform and dimensions and safety
features will thus change.

Spare Parts

Please refer to our indicated service address in
case of the repurchase of spool or cutting blade.
Alternatively, you can also order 1.5 mm (ERT 40
Pro: 1.4 mm) thick nylon line in the specialist trade
and wind this onto the line spool yourself. Please
absolutely ensure, in this case, that you wind on
not more than 2 x 5 m (ERT 40 Pro: 2 x 4 m) of line
and that you wind this in parallel into the two line
conduits - opposite the motor rotation direction.
The motor rotation direction is marked on the pro-
tective cover with an arrow.
Waste disposal and
environmental protection
If, one day, you no longer have any use for your
device, or if the device should have been used so
intensely that you must replace it, then dispose of it
in an environmentally sound way. Machines do not
belong in domestic waste. Give the device up at a
waste disposal location. The plastic and metal
parts employed can be separated out into pure
grade and thus recycling can be implemented. Ask
your dealer about this.