Technical Details; Rating Plate And Explanation Of Symbols - Parkside PFDS 33 A1 Originalbetriebsanleitung

Technical details

Model: flux-cored wire welder PFDS 33 A1
Voltage U : 230 V ~ / 50 Hz
1
(alternating current)
Welding current I : 48 A/90 A
2
No-load voltage U : 27.5 V
0
Protection rating: IP 21S
Insulation class: H
Weight: 12.7 kg
Welding wire: Ø 0.7/0.8/0.9/1.0 mm
Welding wire: approx. 450 g
Welding current:
▯ Material thickness
1.0–2.0 mm: with Ø 0.7 / 0.8 mm welding wire,
welding current 48 A – 60 A
▯ Material thickness
2.0–6.0 mm: with Ø 0.8/0.9/1.0 mm welding wire,
welding current 70 A – 90 A
Duty cycle X: 10% at 90 A welding current
60% at 48 A welding current

Rating plate and explanation of symbols

PFDS 33 A1
~ 50 Hz
U = 27.5 V
0
U
1 ~ 50 Hz U = 230 V
1
IP21S
PFDS 33 A1
S/N:
EN 60974-1:2012
EN 60974-10:2014/A1:2015
Class A
48 A / 16 V – 90 A / 18.5 V
X 10 % 60 %
I 90 A 48 A
2
18.5 V 16 V
2
I = 13 A I = 4.8 A
1max 1eff
12.7 kg
Single-phase transformer
U
Nominal no-load voltage
0
Ø mm
Permissible flux-core wire diameter
Symbol for self-shielded flux-core welder
I
Rated value of the welding current
2
X
Duty cycle in %
U
Standardised working voltage
2
1 ~ 50 Hz Mwains supply, number of phases alternating
current symbol and rated value of the frequency
U
Rated value of the mains voltage
1
I max.
Max. rated value of the mains current
1
I eff
Effective value of the max. mains current (A)
1
IP21S
Protection class
H
Insulation class
12.7 kg
Weight of the appliance
Follow the safety regulations
Read the operating instructions
Do not store or use the appliance in wet environ-
ment or in rain
Symbol for welding power sources that are suit-
able for welding in environments with increased
electrical risks.
Nominal value of the required mains fuse: 16 A
GB │ 3
■