A Anhang; Beispiel Für Die Datei Basesys.ini - Siemens SINUMERIK 840D sl Inbetriebnahmehandbuch

08/2005

A Anhang

A
A Anhang
A.1 Beispiel für die Datei basesys.ini
Die mitgelieferte Vorlage für die basesys.ini sieht wie folgt aus:
------------------------------------------------------------------------------
; Default Linux basesystem configuration
; --------------------------------------
;
; section ID is for Windows compatibility and is ignored ;)
[ExternalInterface]
; If ExternalIP is set, you can force the external Ethernet interface to use
; a fixed IP addr. etc instead of using DHCP
; if a Hostname is set, it even overrides one received by DHCP
;ExternalIP=210.210.210.210
;ExternalNetMask=255.255.255.0
;Gateway=210.210.210.1
;Nameservers=210.210.210.1 210.210.210.2
;Timeservers=210.210.210.3
;Hostname=somename
;Domain=example.com
; if ExternalIP is empty (default), DHCP is used with the following ClientID
; the default is "@MAC" to use the MAC address, alternatives are "@NAME" to use
; the hostname (Hostname above) or any other arbitrary string
;DHCPClientID=@MAC
[InternalInterface]
; With InternalIP and InternalNetMask (both must be set together),
; you can change the address on the internal/TCU/automation net. This should
; not be needed normally
;InternalIP=192.168.214.1
;InternalNetMask=255.255.255.0
© Siemens AG 2005 All Rights Reserved
IM7/A-39
SINUMERIK 840D sl/840D/840Di/810D IBN Basesoftware (IAM2) - Ausgabe 08/2005