Siemens SINUMERIK 840D sl Inbetriebnahmehandbuch Seite 250

A Anhang 08/2005
; This is the range of dynamic IPs given out by the DHCP server
; Defaults should be sensible
;InternalDynRangeStart=192.168.214.10
;InternalDynRangeEnd=192.168.214.240
[LinuxBase]
; Keep size of /var/log/messages around this value (not followed exactly for
; performance reasons)
LogfileLimit=102400
; Protocol/Port pairs to open in the firewall (e.g., TCP/5900, UDP/514, ...)
;FirewallOpenPorts=TCP/5900
; If there is only one Ethernet interface, it's used by default as an external
; (company) network. Alternatively, usage as automation net (TCU boot support
; etc.) is possible by setting NetworkModel to "automation". (Only NCU,
; Service, and PCU20A variants!)
;NetworkModel=automation
; DisableSubsystems can be used to skip certain CFSes (= subsystems)
; a list of multiple names (separated by spaces) is possible
; a simple name means all CFSes with this name, an absolute path (e.g.,
; /siemens/sinumerik/nck) exactly this one CFS
; with the special value "ALL", all subsystems can be disabled
;DisableSubsystems=nck
; Setting DisableDHCPD<INTERFACE> to 1 suppresses that a DHCP server is
; started on that interface
;DisableDHCPDeth0=1
;DisableDHCPDibn0=1
© Siemens AG 2005 All Rights Reserved
IM7/A-40
SINUMERIK 840D sl/840D/840Di/810D IBN Basesoftware (IAM2) - Ausgabe 08/2005