Page GB-14
Assembly
Fixing the exhaust air
hose (only for exhaust air
operation)
• Insert the exhaust air hose into the con-
nection at the wall break (hose end with
150 mm diameter)
Final steps
WARNING!
Never use a damaged appliance.
1. Guide the mains cord covered in the flue
screen to the socket and insert it into a
properly installed socket.
(8)
(6)
2x
2. Pull the upper part of the flue screen (2)
all the way up to the wall bracket for the
upper flue screen (6).
3. Screw the flue screen on tightly using two
plate screws (8).
4. Remove the blue protective films.
Installation is now complete.
(2)