Inserting Activated Charcoal Filter For Circulation Air Operation; Operation - hanseatic SY-103D1-E3-C25-900 Gebrauchsanleitung

Page 14 Materials required for assembly
19. Press the button (13)
order to switch on the exhaust hood. The
exhaust hood's cover will open.
20. Push the lock of the grease filters (8)
sideways and carefully remove both
grease filters upwards.
21. Remove all protective films from both
grease filters.
22. Reinsert the grease filters in reverse or-
der.
23. Press the button(13)
order to close the exhaust hood's cover
and switch the appliance off. You have
successfully assembled your exhaust
hood; the appliance is ready touse.
Inserting activated charcoal
filter for circulation air

operation

A carbon filter (odour filter) is filled with acti-
vated carbon which reduces kitchen fumes
during cooking. If used frequently, you should
change the filters regularly. Please also refer
to the chapter 'Inserting/replacing activated
charcoal filters' on page 19.
for 3 secondsin
(8)
1. Press the button (13)
2. Once the cover has reached the highest
for 3 seconds in
3. Slide the grease filter lock (8) sideways
appliance on and off for 3 seconds. The
exhaust hood's cover will open.
position: Unplug the mains plug or switch
off the power to the corresponding house-
hold fuse.
and carefully remove the grease filter by
pulling it upwards.
to switch the
(8)