Logging Measured Data - Kathrein MSK 115/S2 Betriebsanleitung

The software referred to here for reading previously saved values is not supplied as standard! It is
available for download from ESC-Kathrein under "MSK115-S2 Meter Log".
Before starting this program, make sure that the USB driver has already been downloaded and installed.
Click on "OK" to obtain a table with your logged measurements. You can now export this data in CSV format
for use with other Offi ce programs. If the table has already been closed you can call it up again under
"View".
If you wish to delete the log data currently held in the MSK 115/S2, select the "File" menu item and click on
"Delete".
Remember: If you delete the log data held in the measuring instrument, the saved entries will be deleted
but the counter will not be reset. Each new item of measured data that is added will be given a sequential
number.
22

LOGGING MEASURED DATA

Start the "MSK115-S2 Meter Log" by double clicking on
the "MSK115-S2 Meter Log" symbol. A small program
window appears.
Connect your MSK 115/S2 to your PC using the USB
cable supplied. Wait until the measuring instrument
automatically switches into "Programming" mode, then
click on the "Read" menu item.
As soon as the fi le has been
read, you will see the "Transfer
complete" message displayed.