Setup Menu - Kathrein MSK 115/S2 Betriebsanleitung

To display the "Setup" menu, switch the MSK 115 off and then press the DOWN key once.
The following menu items can be accessed from this menu.
Backlight on
Clicking off
Brightness 15
Contrast 15
Sleep 15M
English
RF dBuV
LNB 13V/18V
Defaults
Azimuth true
1.0Ka-0021
Cities
^For more
• The following languages are available for menu items and display information: German, English, French,
Spanish, Italian, Dutch and Polish.
• The RF can be displayed in dBμV, dBm or dBmV mode
• The LNB voltage 13/18 Volt can be switched off completely. If the LNB voltage is switched to 0 Volt, the
satellite display alternates between the selected satellite setting and "LNB 0V".
Searching
• To revert to the original setup settings, select "Defaults" and press the
affect the satellite settings stored in the memory
• The "V1.0Ka-21" display is only intended as a Kathrein reference number and may vary.
10

SETUP MENU

Use the cursor keys to navigate through the set-up menu (
modify values ( ). After you have made all the settings, return to the
fi rst menu item (Exit). Press the
The measuring instrument now switches itself off.
Note: The entire menu is shown here, however, on the LCD display
only four options are shown at a time.
or button to load your changes.
Searching
button. This procedure will not
) and