Logging Measured Data - Kathrein MSK 115 Betriebsanleitung

The software referred to here for reading previously saved values is not supplied as standard!
It is available for download from ESC-Kathrein under "Kathrein LOG Reader".
Before starting this program, make sure that the USB driver has already been downloaded and installed.
Start the "Kathrein Log Reader" by double clicking on the
"Kathrein Log Reader" symbol. A small program window
appears (see image on the right).
Connect your MSK 115 to your PC, using the USB
cable supplied. Wait until the measuring instrument
automatically switches into "Programming" mode, then
click on the "Read" menu item.
Click on "OK" to obtain a table with your logged measurements. You can now export this data in CSV format
for use with other Offi ce programs. If the table has previously already been closed you can call it up again
under "View".
18

LOGGING MEASURED DATA

As soon as the fi le has been read
you will see the "Log download
complete" message displayed.
If you wish to delete the log data currently held
in the MSK 115, select the "File" menu item
and click on "Delete".
Remember: If you delete the log data held
in the measuring instrument, the counter is
not reset, only the saved entries are deleted.
When further measured data are added to
the log, they will be given numbers that are
sequentially incremented.