Changing A Setting Value Using The Navigation Wheel And The Drop-Down Menu; Changing The Frequency Value Using The Numeric Field - Kathrein MSK 30 Gebrauchsanleitung

3.3 Changing a setting value using the naviga-
tion wheel and the drop-down menu
3.4

Changing the frequency value using the numeric field

1. Press the navigation wheel to activate the line with setting parameters.
➯ A setting parameter is active (marked in green).
2. Rotate the navigation wheel to select a desired setting parameter.
3. Press and hold the navigation wheel to call up the drop-down menu.
➯ The drop-down menu opens.
4. Rotate the navigation wheel to change the setting value.
➯ The setting value changes.
5. Press the navigation wheel to confirm the selection.
➯ The new setting value is saved.
1. Press the navigation wheel to activate the line with setting parameters.
➯ A setting parameter is active (marked in green).
2. Rotate the navigation wheel to select the frequency parameter.
➯ The frequency parameter is active (marked in green).
3. Press and hold the navigation wheel to call up the numeric field.
➯ The menu shown on the left appears.
4. Enter a frequency value using the numeric field at the bottom of the
touch screen. The cursor goes to the next input field automatically.
Tip
If you want to change the value in an input field, rotate the
navigation wheel to go to this innput field and enter a new
value.
7 of 28