Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Special Accessories; In The Event Of Malfunctions; Spare Parts And Parts Subject To Wear - Bosch KTE 001.05 Bedienungsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
5.

Technical data

Housing
Length
Width
Height
Material
Connecting Length
Weight without
battery
6.

Special accessories

Crocodile clip
Housing protection order no. 1 680 591 009
Dry battery
7.
In
the
malfunctions
If the Pocket-Motortester malfunctions, it
must be returned in its original packaging
for repair.
Before returning the tester for repair:
always check the fitted 9 V battery
(see Section 3.4).
If the unit is opened within the
guarantee period, all guarantee
claims are invalidated.
approx.198 mm
approx. 70 mm
approx.
50/32
mm
shock-proof and
unbreakable pla-
stic, resistant to
oil, petrol and ag-
eing
1.5 m; fitted with a
yellow clip and
green clip
approx. 0.4 kg
order no. 1 684 483 002
commercially available
9 V type IEC 6F 22
event
8.
Spare parts and parts
subject to wear
Designation
Connecting cable
Sleeve, green
Sleeve, yellow
Connecting clip
Battery cover
9.
Replacing the connecting
cable
- Remove the battery cover
- Lay the Pocket-Motortester on its top
side
- Remove the 4 fastening screws from the
housing component and remove the hou-
sing component.
- Take out the printed circuit board toge-
ther with the connecting cable
- Replace the connecting cable
Connection
• Connect the cable with the yellow clip
(terminal 15) to the solder point MP 15
• Connect the cable with the green clip
(terminal 1) to the solder point MP 1
of
Only use a soldering iron with a max.
output of 30 W and only use solder for
electronic components. Do not use
soldering fluid or soldering paste.
- Re-insert the printed circuit board toge-
ther with the connecting cable.
- Lead the connecting cable through the
recess and insert the grommet into the
recess.
- Refit the lower section of the housing,
ensuring that the grommet engages cor-
rectly with the recess in the lower section
of the housing.
- Screw the housing together again with
the 4 fastening screws.
Order no.
1 684 448 143
1 680 306 047
1 680 306 048
1 681 354 002
1 685 500 097
27

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kte 001.06Kte 001.03Kte 001.07

Inhaltsverzeichnis