Parkside PWSA 12-LI A1 Originalbetriebsanleitung Seite 10

GB IE NI
jewellery. Keep your
hair, clothing and gloves
away from moving
parts. Loose clothes, jewelle-
ry or long hair can be caught
in moving parts.
• If devices are provided
for the connection of
dust extraction and coll-
ection facilities, ensure
these are connected and
properly used. Use of dust
collection can reduce dust-
related hazards.
Power tool use and care :
• Do not force the power
tool. Use the correct po-
wer tool for your appli-
cation. The correct power
tool will do the job better and
safer at the rate for which it
was designed.
• Do not use the power
tool if the switch does
not turn it on and off.
Any power tool that cannot
be controlled with the switch
is dangerous and must be re-
paired.
• Disconnect the plug from
the power source and/
or the battery pack from
the power tool befo-
re making any adjust
-ments, changing acces-
sories, or storing power
tools. Such preventive safety
measures reduce the risk of
starting the power tool acci-
dentaIly.
1 0
CY
• Store idle power tools
out of the reach of child-
ren and do not allow
persons unfamiliar with
the power tool or these
instructions to operate
the power tool. Power
tools are dangerous in the
hands of untrained users.
• Maintain power tools.
Check for misalignment
or binding of moving
parts, breakage of parts
and any other condition
that may affect the po-
wer tool's operation. If
damaged, have the po-
wer tool repaired before
use. Many accidents are
caused by poorly maintained
power tools.
• Keep cutting tools sharp
and clean. Properly main-
tained cutting tools with sharp
cutting edges are less Iikely
to bind and are easier to con-
trol.
• Use the power tool, ac-
cessories and tool bits
etc. in accordance with
these instructions, ta-
king into account the
working conditions and
the work to be perfor-
med. Use of the power tool
for operations different from
those intended could result in
a hazardous situation.
Service:
• Have your power tool
serviced by a qualified
repair person using only
identical replacement