Troubleshooting; Error Correction - Parkside PWSA 12-LI A1 Originalbetriebsanleitung

Troubleshooting

Always unplug the shredder before working on it.
Risk of electric shock!
Problems
Device doesn't start
Grinding tool does
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
Possible Cause
Mains voltage missing
Main circuit breaker is tripped
On/off switch (
defective
Engine faulty
Grinding disc nut is loose
Workpiece, remaining workpie-
ces or remaining grinding tools
block drive
Device is overloaded through
workpiece
Grinding disc nut is loose
Grinding disc is defective

Error correction

Check the socket, mains cable,
line, mains plug, repairs to be
carried out by qualified electri-
cian if necessary, check main
circuit breaker.
5) may be
Repair by Customer Care
Tighten grinding disc nut (see
„Changing disc")
Remove blockages
Reduce pressure on grinding tool
Workpiece unsuitable
Tighten grinding disc nut (see
„Changing disc")
Change grinding disc
GB IE NI CY
2 5